Refer to the exhibit.
An administrator wants to verify the operation of MultiZone in a network. The administrator
uses the command show ap debug multizone to generate the output shown in the exhibit.
Based on the output, which statement is true?

A.

Zone 1 is the primary zone, and zone 0 is the data zone.

B.

The primary zone has limited the data zone to one WLAN.

C.

The maximum VAPs in the MultiZone is 15.

D.

The MultiZone APs are in a cluster.

An administrator needs to add connectivity between two buildings that are within 15 meters
of each other on a company’s campus. The administrator decides to implement Aruba’s
wireless mesh feature between an AP in each building. How should the administrator
deploy the two APs to implement the mesh feature?

A.

one as a Mesh Portal AP and one as a Remote Mesh Point AP

B.

one as a Mesh Portal AP and one as a Mesh Point AP

C.

one as a Remote Mesh Portal AP and one as a Remote Mesh Point AP

D.

one as a campus AP and one as a Mesh Point AP

An administrator needs to modify a VAP used for a branch office RAP. The VAP’s
operating mode is currently defined as backup and uses tunnel mode forwarding. The
administrator wants to implement split-tunnel forwarding mode in the VAP.
Which WLAN operating mode must the administrator define for the VAP before the tunnel
forwarding mode can be changed to split-tunnel?

A.

Persistent

B.

Standard

C.

Trusted

D.

Always

Which protocol communicates RF neighborhood information to an Aruba Mobility Master
(MM) for use by AirMatch?

A.

GRE

B.

PAPI

C.

SNMP

D.

AMON

What are the responsibilities of a cluster leader in a cluster of Aruba Mobility Controllers (MCs)? (Choose two.)

A.

To identify primary and secondary Mobility Controllers for APs

B.

To create a table to determine how a wireless client maps to a cluster member

C.

To identify a backup cluster leader for redundancy

D.

To manage the configuration of cluster members

E.

To automatically load balance clients if the load across cluster members changes

What is true about Aruba controllers under normal operations in a Mobility Master (MM)- Mobility Controller (MC) architecture?

A.

The Mobility Master can push a full configuration to a Mobility Controller.

B.

ARM must be used to optimize wireless performance.

C.

The APs can terminate on both Mobility Masters and Mobility Controllers.

D.

Any controller can perform local configurations.

Refer to the exhibit.

An administrator configures policies to allow RAPs to connect to the corporate office and
remote users to access resources. Which function does the VPN address pool serve in this
situation?

A.

Assigns an inner IP address to the RAP used within the VPN

B.

Assigns a public IP address that the RAP should use on its internet port

C.

Assigns IP addresses for remote users

D.

Assigns a DHCP address pool for the RAP

An administrator implements machine authentication in an 802.1X profile. Which user role
will be assigned to the user’s session if machine authentication passes, but the 802.1X
user authentication fails for a user who connects?

A.

802.1X default user role

B.

Machine authentication default machine role

C.

802.1X initial user role

D.

Machine authentication default user role

An administrator configures a port on a RAP through the association of an AAA profile with
802.1X authentication to a RAP Ethernet port. This port connects to a switch with user
desktops attached. The administrator notices that when users connect wirelessly to the
RAP, a user role correctly restricts their traffic. But, when users connect with their wired
desktops, they are assigned an initial role and routed to a Captive Portal page.
What must the administrator do to enable desktop usage based on the user’s role
assignment?

A.

Implement ACLs on the RAP port.

B.

Apply a server-derived role policy to the RAP port.

C.

Identify the RAP port as untrusted.

D.

Map the RAP port to an authentication profile.

On the Aruba Mobility Master (MM), when is an AP configured to act as Mesh Portal or
Mesh Point?

A.

when the mesh cluster profile is created

B.

at the time of the AP’s apboot mode CLI

C.

when the APs are provisioned

D.

when the mesh radio profile is created