Which type of Aruba AP uses its radio as its back-haul connection?
A.
Mesh Point
B.
Mesh Porta
C.
Air Monitor (AM)
D.
Remote AP (RAP)
Mesh Porta
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching,
and smart rate port support Which of the following switches would meet these requirements?
A.
3810M series
B.
6300 series
C.
5400R series
D.
8300 series
3810M series
A network architect is designing a Wi-Fi solution for a customer using Aruba Central's VisualRF tool When
creating a Campus view, how would the network architect pull in a map that displayed the campus location in
a city?
A.
Import the longitude and latitude information from any web-based map site
B.
Import the longitude and latitude information from Google Maps
C.
Create a screen capture from any web-based map site and import the picture file
D.
Use VisualRF's built-in map tool and define the appropriate longitude and latitude information
Import the longitude and latitude information from any web-based map site
Which AP mode allows an AP to operate autonomously?
A.
IAP
B.
AM
C.
RAP
D.
OCAP
OCAP
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has
three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters)
total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The
network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets.
There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350
square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which
square footage (square meter) value should a network architect use when determining the number of APs in a
capacity design for each floor?
A.
55.750 square feet {5,175 square meters)
B.
56.350 square feet {5,235 square meters)
C.
47.000 square feet {4,365 square meters)
D.
338,100 feet {31,410 square meters)
56.350 square feet {5,235 square meters)
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware
Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
• Two clustered 7205 controllers with 300 campus APs
• Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well
as implementing AirMatch. What would meet the license requirements for this scenario?
A.
LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
B.
LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
C.
LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
D.
LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
A customer has some employees that travel to various locations, where these employees will need Wi-Fi
access at these locations. Because many of these locations do not have wireless support, the employees will
need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be
provided by a national phone company USB wireless card which will be connected to AP. The wireless
solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost
efficiently?
A.
318
B.
303H
C.
365
D.
203R
318
A network architect is designing a new wireless solution for a company The company needs seamless roaming
and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to
manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?
A.
Clustering
B.
AirMatch
C.
Client Match
D.
IAP VC
Clustering
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus
APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the
APs might be necessary Which console connection cable should the customer purchase for the 555 APs?
A.
RJ-45
B.
RS-232
C.
USB-A
D.
Micro-B USB
Micro-B USB
A network architect is given the task to design a new network solution for NewStellar Company, Inc.
NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect
has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit
Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235
square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building
space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network
cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions
contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per
floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports
from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1,
Floor 2, including the central area, and that half the required APs will connect to each wiring closet,
approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+
needs?
A.
30
B.
22
C.
42
D.
8
30