IP route-statiC.10.0.12.0255.255.255.0192.168.1.1 About this command description is
correct ()

A.

This command configures a route to the 10.0.12.0 network

B.

The priority of this route is 100

C.

If the router learns a router with the same destination network as this route through other
protocols, the router will prefer this route

D.

This command configures a route to the 192.168.1.1 network

Which of the following statements about MPLS Labe1 labels is wrong? ()

A.

The label is encapsulated between the network layer and the transport layer

B.

The label is carried by the header of the message and does not contain the
topologyinformation.

C.

The label is used to uniquely identify the forwarding equivalence class FEC to which a
packet belongs

D.

The tag is a short identifier with a fixed length. It only has a local meaning

Which of the following commands to configure the default route is correct? ()

A.

(Huawei)ip route-statiC.0.0.0.0 255.255.255.255192.168.1.1

B.

(Huawei)ip route-statiC.0.0.0.0 0.0.0.0 192.168.1.1

C.

(Huawei)ip route-statiC.0.0.0.0 0.0.0.0 0.0.0.0

Which of the following statements about Prefix Segment is wrong? ()

A.

Prefix Segmont needs to be configured manually

B.

Prefix Segment spreads to other network elements through the IGP protocol, which is globally visible and effective

C.

Prefix Segment is used to identify a destination address prefix in the network (Prefix)

What is the protocol number corresponding to the ospf protocol at the network layer? ()

A.

89

B.

6

C.

0

D.

1

If the broadcast address of a network is 172.16.1.255, then its network address may be ().

A.

172.16.1.128

B.

172.16.2.0

C.

172.16.1.1

D.

172.86.1.253

Among the following commands for configuring the default route, the correct one is ()

A.

(Huawei) ip route-statiC.0.0.0.0 0.0.0.0 192.168.1.1

B.

(Huawei) ip route-statiC.0.0.0.0 0.0.0.0 0.0.0.0

C.

(Huawei) ip route-statiC.0.0.0.0 255.255.255.255192.168.1.1

When deploying ACL on Huawei equipment, which of the following descriptions is correct is
()

A.

When calling ACL under the interface, it can only be applied to the outbound direction

B.

ACL can match the TCP/UDP port number of the packet, and can specify the range of
port numbers

C.

ACL cannot be used to filter OSPF traffic, because COSPF traffic does not use UDP
protocol encapsulation

D.

The same ACL can be called under multiple interfaces

E.

When ACL defines rules, it can only proceed in the order of 10, 20, 30

DHCP is an application layer protocol. In order to make it more reliable when assigning P,
its transport layer uses TCP protocol.

A.

True

B.

False

The network management system can only view the operating status of the device through
the SNMP protocol, but cannot issue configurations. ()

A.

True

B.

False