Information system auditor

Explanation: An information system auditor is an individual who inspects whether the security policies, standards, guidelines, and procedures are efficiently performed in accordance with the company's stated security objectives. He is responsible for reporting the senior management about the value of security controls by performing regular and independent audits. Answer: B is incorrect. A data owner determines the sensitivity or classification levels of data. Answer: A is incorrect. An informational systems security professional is an individual who designs, implements, manages, and reviews the security policies, standards, guidelines, and procedures of the organization. He is responsible to implement and maintain security by the senior-level management. Answer: C is incorrect. A senior management assigns overall responsibilities to other individuals.

Phase 2 

Explanation: The Phase 2 of DITSCAP C&A is known as Verification. The goal of this phase is to obtain a fully integrated system for certification testing and accreditation. This phase takes place between the signing of the initial version of the SSAA and the formal accreditation of the system. This phase verifies security requirements during system development. Answer: C, B, and A are incorrect. These phases do not take place between the signing of the initial version of the SSAA and the formal accreditation of the system.

Perform OS fingerprinting on the We-are-secure network

Explanation: John will perform OS fingerprinting on the We-are-secure network. Fingerprinting is the easiest way to detect the Operating System (OS) of a remote system. OS detection is important because, after knowing the target system's OS, it becomes easier to hack into the system. The comparison of data packets that are sent by the target system is done by fingerprinting. The analysis of data packets gives the attacker a hint as to which operating system is being used by the remote system. There are two types of fingerprinting techniques as follows: 1.Active fingerprinting 2.Passive fingerprinting In active fingerprinting ICMP messages are sent to the target system and the response message of the target system shows which OS is being used by the remote system. In passive fingerprinting the number of hops reveals the OS of the remote system. Answer: D and B are incorrect. John should perform OS fingerprinting first, after which it will be easy to identify which services are running on the network since there are many services that run only on a specific operating system. After performing OS fingerprinting, John should perform networking mapping. Answer: C is incorrect. This is a pre-attack phase, and only after gathering all relevant knowledge of a network should John install a backdoor. 

It ensures reliable and timely access to resources. 

Explanation: The concept of availability ensures reliable and timely access to data or resources. In other words, availability ensures that the systems are up and running when needed. The availability concept also ensures that the security services are in working order. Answer: A and D are incorrect. The concept of integrity ensures that modifications are not made to data by unauthorized personnel or processes. It also ensures that unauthorized modifications are not made to data by authorized personnel or processes Answer: B is incorrect. Accountability determines the actions and behaviors of an individual within a system, and identifies that particular individual. Audit trails and logs support accountability.

Asset information storage and correlation 

Incident tracking and reporting  

Security knowledge base 

Graphical user interface 

Explanation: The features of SIEM products are as follows: Graphical user interface (GUI): It is used in analysis for identifying potential problems and reviewing all available data that are associated with the problems. Security knowledge base: It includes information on known vulnerabilities, log messages, and other technical data. Incident tracking and hacking: It has robust workflow features to track and report incidents. Asset information storage and correlation: It gives higher priority to an attack that affects a vulnerable OS or a main host. Answer: B is incorrect. SIEM product does not have this feature.

Enclave Boundaries

Explanation: The areas of information system, as separated by Information Assurance Framework, are as follows: Local Computing Environments: This area includes servers, client workstations, operating system, and applications. Enclave Boundaries: This area consists of collection of local computing devices, regardless of physical location, that are interconnected via local area networks (LANs) and governed by a single security policy. Networks and Infrastructures: This area provides the network connectivity between enclaves. It includes operational area networks (OANs), metropolitan area networks (MANs), and campus area networks (CANs). Supporting Infrastructures: This area provides security services for networks, client workstations, Web servers, operating systems, applications, files, and single-use infrastructure machines

Password propagation 

Explanation: Password propagation provides an alternative by requiring that a user's authentication credentials be verified by the database before providing access to that user's data. Answer: D is incorrect. Account lockout implements a limit on the incorrect password attempts to protect an account from automated password-guessing attacks. Answer: B is incorrect. Authenticated session allows a user to access more than one access-restricted Web page without re-authenticating every page. It also integrates user authentication into the basic session model. Answer: A is incorrect. Secure assertion distributes application-specific sanity checks throughout the system.

It is the probabilistic risk after implementing all security measures

Explanation: The residual risk is the risk or danger of an action or an event, a method or a (technical) process that still conceives these dangers even if all theoretically possible safety measures would be applied. The formula to calculate residual risk is (inherent risk) x (control risk) where inherent risk is (threats vulnerability). Answer: B is incorrect. In information security, security risks are considered as an indicator of threats coupled with vulnerability. In other words, security risk is a probabilistic function of a given threat agent exercising a particular vulnerability and the impact of that risk on the organization. Security risks can be mitigated by reviewing and taking responsible actions based on possible risks. Answer: C is incorrect. Vulnerability is a weakness or lack of safeguard that can be exploited by a threat, thus causing harm to the information systems or networks. It can exist in hardware , operating systems, firmware, applications, and configuration files. Vulnerability has been variously defined in the current context as follows: 1.A security weakness in a Target of Evaluation due to failures in analysis, design, implementation, or operation and such. 2.Weakness in an information system or components (e.g. system security procedures, hardware design, or internal controls that could be exploited to produce an information-related misfortune.) 3.The existence of a weakness, design, or implementation error that can lead to an unexpected, undesirable event compromising the security of the system, network, application, or protocol involved.

isUserInRole()

getUserPrincipal()

getRemoteUser() 

Explanation: The various methods of the HttpServletRequest interface are as follows: getRemoteUser(): It returns the user name that is used for the client authentication. The value of the getRemoteUser() method returns null if no user is authenticated. isUserInRole(): It determines whether the remote user is granted a specified user role. The value of the isUserInRole() method returns true if the remote user is granted the specified user role; otherwise it returns false. getUserPrincipal(): It determines the principle name of the current user and returns the java.security.Principal object. The java.security.Principal object contains the remote user name. The value of the getUserPrincipal() method returns null if no user is authenticated. Answer: A is incorrect. It is not defined in the HttpServletRequest interface. The getCallerIdentity() method is used to obtain the java.security.Identity of the caller.

Penetration test 

Explanation: A penetration testing is a method of evaluating the security of a computer system or network by simulating an attack from a malicious source. The process involves an active analysis of the system for any potential vulnerabilities that may result from poor or improper system configuration, known or unknown hardware or software flaws, or operational weaknesses in process or technical countermeasures. This analysis is carried out from the position of a potential attacker, and can involve active exploitation of security vulnerabilities. Any security issues that are found will be presented to the system owner together with an assessment of their impact and often with a proposal for mitigation or a technical solution. The intent of a penetration test is to determine feasibility of an attack and the amount of business impact of a successful exploit, if discovered. It is a component of a full security audit. Answer: C is incorrect. A paper test is the least complex test in the disaster recovery and business continuity testing approaches. In this test, the BCP/DRP plan documents are distributed to the appropriate managers and BCP/DRP team members for review, markup, and comment. This approach helps the auditor to ensure that the plan is complete and that all team members are familiar with their responsibilities within the plan. Answer: D is incorrect. A walk-through test is an extension of the paper testing in the business continuity and disaster recovery process. In this testing methodology, appropriate managers and BCP/DRP team members discuss and walk through procedures of the plan. They also discuss the training needs, and clarification of critical plan elements. Answer: A is incorrect. A full operational test includes all team members and participants in the disaster recovery and business continuity process. This full operation test involves the mobilization of personnel. It restores operations in the same manner as an outage or disaster would. The full operational test extends the preparedness test by including actual notification, mobilization of resources, processing of data, and utilization of backup media for restoration.