Which design requirement is met by implementing syslog versus SNMP?
A.
when automation capabilities are needed
B.
when proactive alerts for critical events must be generated
C.
when organization-wide information must be collected
D.
when information such as flows and client connectivity must be gathered
when information such as flows and client connectivity must be gathered
Reference:
https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/
Meraki_Device_Reporting_-_Syslog%2C_SNMP%2C_and_API
When an SSID is configured with Sign-On Splash page enabled, which two settings must be configured for unauthenticated clients to have full network access and not be allow listed? (Choose two.)
A.
Controller disconnection behavior
B.
Captive Portal strength
C.
Simultaneous logins
D.
Firewall & traffic shaping
E.
RADIUS for splash page settings
Controller disconnection behavior
Captive Portal strength
Reference: https://documentation.meraki.com/MR/Access_Control
For which two reasons can an organization become “Out of License”? (Choose two.)
A.
licenses that are in the wrong network
B.
more hardware devices than device licenses
C.
expired device license
D.
licenses that do not match the serial numbers in the organization
E.
MR licenses that do not match the MR models in the organization
more hardware devices than device licenses
expired device license
Reference:
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_FA
Qs
Refer to the exhibit.
For an AP that displays this alert, which network access control method must be in use?
A.
preshared key
B.
WPA2-enterprise with my RADIUS server
C.
splash page with my RADIUS server
D.
MAC-based access control with RADIUS server
preshared key
Which type of authentication protocol is used when using OSPF on an MX appliance?
A.
MD5
B.
certificate
C.
plaintext
D.
SHA-1
MD5
Reference: https://documentation.meraki.com/MX/Site-to-site_VPN/
Using_OSPF_to_Advertise_Remote_VPN_Subnets
Which information is used to calculate whether a WAN link has high usage?
A.
data under Security & SD WAN > Appliance Status > Uplink > Live Data
B.
total historical throughput of an uplink
C.
total number of devices that are actively passing traffic
D.
value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
A new application needs to be pushed to all iOS devices. Some devices report “NotNow” in
the event log and do not install the application.
What does the “NotNow” event indicate?
A.
The application requires the most recent iOS version.
B.
The device is locked with a passcode.
C.
The device cannot connect to Apple servers.
D.
The device cannot connect to Cisco Meraki servers.
The device is locked with a passcode.
Reference: https://community.meraki.com/t5/Mobile-Device-Management/Check-NotNow-
Status/td-p/3887
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
A.
Renew the Dashboard license.
B.
License a network.
C.
License more devices.
D.
Call Meraki support.
E.
Wait for the devices to auto-renew
Renew the Dashboard license.
License more devices.
Reference:
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Co-
Termination_Licensing_Overview
Which requirement is needed to implement Fast Lane on Cisco Meraki APs?
A.
wireless profile installed on an Apple iOS device
B.
wireless profile installed on a Cisco iOS access point
C.
adaptive 802.11r disabled
D.
traffic shaping rule tagging traffic with a DSCP value of 46 to Apple.com
wireless profile installed on an Apple iOS device
Reference: https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/
Wireless_QoS_and_Fast_Lane
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
A.
For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
B.
Peers contact the VPN registry at UDP port 9350.
C.
For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
D.
Peers contact the VPN registry at TCP port 9350.
E.
For IPsec tunneling, peers use UDP ports 500 and 4500.
Peers contact the VPN registry at UDP port 9350.
For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
Reference: https://documentation.meraki.com/MX/Site-to-site_VPN/Meraki_Auto_VPN_-
_Configuration_and_Troubleshooting