In an SD-Access solution what is the role of a fabric edge node?

A.

to connect external Layer 3- network to the SD-Access fabric

B.

to connect wired endpoint to the SD-Access fabric

C.

to advertise fabric IP address space to external network

D.

to connect the fusion router to the SD-Access fabric

Refer to the exhibit How was spanning-tree configured on this interface?

A.

By entering the command spanning-tree portfast trunk in the interface configuration mode.

B.

By entering the command spanning-tree portfast in the interface configuration mode

C.

By entering the command spanning-tree mst1 vlan 10,20,30,40 in the global configuration mode

D.

By entering the command spanning-tree vlan 10,20,30,40 root primary in the interface configuration mode

Refer to the exhibit. What does the error message relay to the administrator who is trying to configure a Cisco IOS device?

A.

A NETCONF request was made for a data model that does not exist.

B.

The device received a valid NETCONF request and serviced it without error.

C.

A NETCONF message with valid content based on the YANG data models was made, but the request failed.

D.

The NETCONF running datastore is currently locked.

Which exhibit displays a valid JSON file?

A.

Option A

B.

Option D

C.

Option C

D.

Option D

Refer to the exhibit. The connecting between SW1 and SW2 is not operational. Which two actions resolve the issue? (Choose two)

A.

configure switchport mode access on SW2

B.

configure switchport nonegotiate on SW2

C.

configure switchport mode trunk on SW2

D.

configure switchport nonegotiate on SW1

E.

configure switchport mode dynamic desirable on SW2

How does the RIB differ from the FIB?

A.

The RIB is used to create network topologies and routing tables. The FIB is a list of routes to particular network destinations.

B.

The FIB includes many routes a single destination. The RIB is the best route to a single destination.

C.

The RIB includes many routes to the same destination prefix. The FIB contains only the best route

D.

The FIB maintains network topologies and routing tables. The RIB is a Iist of routes to particular network destinations.

Which three elements determine Air Time efficiency? (Choose three)

A.

evert-driven RRM

B.

data rate (modulation density) or QAM

C.

channel bandwidth

D.

number of spatial streams and spatial reuse

E.

RF group leader

F.

dynamic channel assignment

An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as the exit point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?

A.

R4(config-router)bgp default local-preference 200

B.

R3(config-router)neighbor 10.1.1.1 weight 200

C.

R3(config-router)bgp default local-preference 200

D.

R4(config-router)nighbor 10.2.2.2 weight 200

Refer to the exhibit.

An engineer implemented several configuration changes and receives the logging message on switch1. Which action should the engineer take to resolve this issue?

A.

Change the VTP domain to match on both switches

B.

Change Switch2 to switch port mode dynamic auto

C.

Change Switch1 to switch port mode dynamic auto

D.

Change Switch1 to switch port mode dynamic desirable

Refer to the exhibit.

The EtherChannel between SW2 and SW3 is not operational which action resolves this issue?

A.

Configure the channel-group mode on SW2 Gi0/1 and Gi0/1 to on.

B.

Configure the channel-group mode on SW3 Gi0/1 to active

C.

Configure the mode on SW2 Gi0/0 to trunk

D.

Configure the mode on SW2 Gi0/1 to access