Refer to the exhibit.

An administrator is troubleshooting why users are not hearing audio when dialing long distance numbers across their Cisco Unified Border Element. The customer’s carrier has a requirement that dialing long distance requires an access code to be entered. Looking at the exhibit, what two actions can be taken to correct signaling? (Choose two.)

A.

Enable PRACK.

B.

Enable Early Offer on the Cisco Unified Border Element.

C.

Enable the supplementary-service media-renegotiate command.

D.

Enable Media Flow Around

E.

Enable Mid-Call Signaling Consumption

Which action is correct with respect to toll fraud prevention configuration in the Cisco Unified Communications Manager Express?

A.

Configure Direct Inward Dial for Incoming ISDN Calls with overlap dialing.

B.

Configure IP Address Trusted Authentication for Incoming VoIP Calls.

C.

Configure the command no ip address trusted authenticate under “voice service voip”.

D.

Enable Secondary Dial tone on Analog and Digital FXO Ports.

Refer to the exhibit.

A call mode through the Cisco Unified Border Element to pilot 2000 is foiling. What is causing the call to foil?

A.

No codecs are configured on the dial peers

B.

The Cisco Unified Border Element is not receiving a response to its OPTION
keepahves.

C.

The destination pattern is incorrect for the dialed number.

D.

VAD was not disabled on the outgoing dial poor.

An administrator is configuring a cluster for ILS and wants to limit the amount of entities that Cisco Unified Communications Manager can write to the database for data that is learned through ILS. Which service parameter is used to adjust this limit?

A.

ILS Max Number of Learned Objects in Database

B.

ILS Active Learned Object Upper Limit

C.

Global Data Service Parameter Limit

D.

Imported Dial Plan Replication Database Object Lower Limit

CollabCorp is a global company with two clusters, emea.collab corp and apac.collab.corp. URI dialing is implemented and working in each cluster. The company configured routing between clusters to make inter-cluster calls via URI. but this is not working as expected. Which two configuration elements should be checked to resolve this issue? (Choose two.)

A.

directory URI partition

B.

SIP route pattern

C.

intercluster trunk

D.

calling search space and partition

E.

SIP trunk

A new deployment is using MVA for a specific user on the sales team, but the user is having issues when dialing DTMF. Which DTMF method must be configured in resolve the issue?

A.

gateway

B.

out-of-band

C.

channel

D.

in-band

An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port
5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)

A.

Incoming Port in SIP Information section of the SIP Trunk configuration.

B.

Incoming Port in Security Information of the SIP Profile configuration.

C.

Destination Port in SIP Information section of the SIP Trunk configuration

D.

Incoming Port in SIP Trunk Security Profile configuration

E.

Destination Port in SIP Trunk Security Profile configuration

Refer to the exhibit.

Calls incoming from the provider are not working through newly set up Cisco Unified Border
Element. Provider engineers get the 404 Not Found SIP message. Incoming calls are
coming from the provider with called number “222333444” and Cisco Unified
Communications Manager is expecting the called number to be delivered as “444333222”.
The administrator already verified that the IP address of the Cisco Unified CM is set up
correctly and there are no dial peers configured other than those shown in the exhibit.
Which action must the administrator take to fix the issue?

A.

Change the destination-pattern on the outgoing dial peer to match “444333222”.

B.

Set up translation-profile on the incoming dial peer to match incoming traffic.

C.

Create specific matching for “222333444” on the incoming dial peer.

D.

Fix the voice translation-rule to match specifically number “222333444” and change it to
“444333222”.

Refer to the exhibit

For long-distance calls, users must prefix their dialed number with “91.” The translation
pattern was created to strip the 91 as the PSTN expects a 10- digit number. The PSTN
also requires the calling number to be set to 9195551234. However, the service provider
has said calls with a different calling number are being received. How is this issue
resolved?

A.

Change the partition of the translation pattern from none to pstn_pt.

B.

Enable Force Authorization Code on the route pattern.

C.

Disable Use Calling Party's External Phone Number Mask on the route pattern.

D.

Enable Use Calling Party's External Phone Number Mask on the translation pattern

An administrator sees the voice register pool 1 command in a Cisco UCME configuration. Which configuration is occurring in this section?

A.

configuration for a pool of SIP phones (similar to device pool on Cisco UCM)

B.

configuration for a single SIP phone

C.

configuration for SIP registrar service

D.

configuration items common for all SIP phones