300-815 Exam Questions

Total 118 Questions

Last Updated Exam : 16-Dec-2024

A customer routes PSTN calls to ITSP through a SIP trunk on Cisco UCM that forwards and receives calls to and from ITSP. ITSP is set to send an E.164 number when the customer's extension is four digits. Which action should be taken to route the incoming calls to four-digit extensions?


A.

Configure a voice translation rule to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.


B.

Set the Significant Digits to 4 on the SIP trunk.


C.

Configure a voice translation profile to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.


D.

Set the Significant Digits to 8 on the SIP trunk.


E.

Configure a voice translation rule to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.


F.

Set the Significant Digits to 4 on the SIP trunk.


G.

Configure a voice translation profile to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.


H.

Set the Significant Digits to 8 on the SIP trunk.





B.
  

Set the Significant Digits to 4 on the SIP trunk.



Refer to the exhibit.

A company needs to ensure that all calls are normalized to E164 format. Which
configuration will ensure that the resulting digit string 14085554001 is created and will be routed to the E.164 routing schema?


A.

Called Party Transformation Mask of + 14085554XXX


B.

Called Party Transformation Mask of 1408555[35)XXX


C.

Calling Party Transformation Mask of +1408555XXXX


D.

Calling Party Transformation Mask of +14085554XXX





A.
  

Called Party Transformation Mask of + 14085554XXX



Which IOS command creates a SIP-enabled dial peer?


A.

voice dial-peer 20 sip


B.

dial-peer voice 20 voip


C.

dial-peer voice 20 pots


D.

dial peer voice 20 sip





B.
  

dial-peer voice 20 voip



Reference: https://www.ciscopress.com/articles/article.asp?p=664148&seqNum=6

A company has an SRST gateway running an IOS XE image. The company plans to enable the IPv6 addressing companywide. To enable the IPv6 in a unified SRST gateway to support SIP phones, what are two supported supplementary features for an IPv6 fallback scenario? (Choose two.)


A.

three-way conference


B.

secure SIP lines


C.

T.38 fax relay


D.

transcoding


E.

SIP trunk





A.
  

three-way conference



C.
  

T.38 fax relay



Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configur
ation/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_sip_isr4000.html

Cisco SIP IP telephony is implemented on two floors of your company. Afterward, users report intermittent voice issues in calls established between floors. All calls are established, and sometimes they work well, but sometimes there is one-way audio or no audio. You determine that there is a firewall between the floors, and the administrator reports that it is allowing SIP signaling and UDP ports from 20000 to 22000 bidirectionally. What are two possible solutions? (Choose two.)


A.

Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 16384-32767


B.

Ask the firewall administrator to change the ports to TCP.


C.

Ask the firewall administrator to change the range of UDP ports to 16384-32767.


D.

Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 20000-22000.


E.

Go to System Parameters in Cisco Unified Communications Manager and change the range of media ports to 20000-22000.





A.
  

Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 16384-32767



C.
  

Ask the firewall administrator to change the range of UDP ports to 16384-32767.



Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/port/9_1_1/
CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-91/CUCM_BK_T2CA6EDE_00_tcp-portusage-
guide- 91_chapter_01.html

An engineer must implement call restriction to toll-free numbers using a class of restriction in a branch Cisco UCME. In which two places is the corlist incoming or cor Incoming command configured? (Choose two.)


A.

"ephone-dn' configuration mode


B.

"voice register global" configuration mode


C.

"telephony-service" configuration mode


D.

"voice register pool" configuration mode


E.

"dial-peer cor custom" configuration mode





A.
  

"ephone-dn' configuration mode



D.
  

"voice register pool" configuration mode



An administrator discovers that employees are making unauthorized long-distance and international calls from logged-off Extension Mobility phones when the authorized users are away from their desks Which two configurations should the administrator configure in the Cisco UCM to avoid this issue? (Choose two.)


A.

Remove the long-distance & international pattern's partitions from the calling search space of the physical phone.


B.

Add the long-distance & international pattern's partitions to the calling search space of the physical phone's directory number.


C.

Remove the long-distance & international pattern's partitions from the calling search space of the device profile.


D.

Add the long-distance & international pattern's partitions to the calling search space of the physical phone.


E.

Add the long-distance & international pattern's partitions to the calling search space of the device profile





A.
  

Remove the long-distance & international pattern's partitions from the calling search space of the physical phone.



E.
  

Add the long-distance & international pattern's partitions to the calling search space of the device profile



What is the relationship between partition, time schedule, and time period in Time-of-Day routing in Cisco Unified Communications Manager?


A.

A partition can have multiple time schedules assigned. A time schedule contains one or more time periods.


B.

A partition can have one time schedule assigned. A time schedule contains one or more time periods.


C.

A partition can have multiple time schedules assigned. A time schedule contains only one time period.


D.

A partition can have one time schedule assigned. A time schedule contains only one time period.





A.
  

A partition can have multiple time schedules assigned. A time schedule contains one or more time periods.



An administrator configured Cisco Unified Mobility to block access to remote destinations for certain caller IDs. A user reports that a blocked caller was able to reach a remote destination. Which action resolves the issue?


A.

Configure Single Number Reach.


B.

Configure an access list.


C.

Configure a mobility identity.


D.

Configure Mobile Voice Access





B.
  

Configure an access list.



An administrator is troubleshooting call failures on an H.323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?


A.

debug H.323 messages


B.

debug H.224 asn1


C.

debug H.246 asn 1


D.

debug H.225 media


E.

debug H.323 asn 1





B.
  

debug H.224 asn1




Page 2 out of 12 Pages
Previous