When configuring a Cisco WLC, which CLI command adds a VLAN with VLAN ID of 30 to a
FlexConnect group named BranchA-FCG?
A.
config flexconnect BranchA-FCG vlan 30 add
B.
config flexconnect group BranchA-FCG vlan add 30
C.
config flexconnect group BranchA-FCG vlan 30 add
D.
config flexconnect BranchA-FCG vlan add 30
config flexconnect group BranchA-FCG vlan add 30
A wireless engineer must implement a corporate wireless network for a large company in
the most efficient way possible. The wireless network must support 32 VLANs for 300
employees in different departments. Which solution must the engineer choose?
A.
Configure a second WLC to support half of the APs in the deployment.
B.
Configure one single SSID and implement Cisco ISE for VLAN assignment according to
different user roles.
C.
Configure different AP groups to support different VLANs, so that all of the WLANs can
be broadcast on both radios.
D.
Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be
broadcast on the 5.0-GHz band.
Configure one single SSID and implement Cisco ISE for VLAN assignment according to
different user roles.
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate
and on-channel attacks are the primary concern. The building is historic, which makes
adding APs difficult. Which Ap mode and submode must be implemented?
A.
Ap mode: local, Ap submode: WIPS
B.
Ap mode: monitor, Ap submode: WIPS
C.
Ap mode: monitor, Ap submode: none
D.
Ap mode: local, Ap submode: none
Ap mode: local, Ap submode: WIPS
For security purposes, an engineer enables CPU ACL and chooses an ACL on the Security
> Access Control Lists > CPU Access Control Lists menu. Which kind of traffic does this
change apply to, as soon as the change is made?
A.
wireless traffic only
B.
wired traffic only
C.
VPN traffic
D.
wireless and wired traffic
wireless and wired traffic
Refer to the exhibit
An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAPPEAP
cannot connect to the network. Based on the local EAP debug controller provided,
why is the client unable to connect?
A.
The client is falling to accept certificate.
B.
The Cisco WLC is configured for the incorrect date.
C.
The user is using invalid credentials
The client is falling to accept certificate.
Which two events are outcomes of a successful RF jamming attack? (Choose two.)
A.
disruption of WLAN services
B.
unauthentication association
C.
deauthentication broadcast
D.
deauthentication multicast
E.
physical damage to AP hardware
disruption of WLAN services
physical damage to AP hardware
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/mse/3350/72/wIPS_Configuration/Guide/wI
PS_72/msecg_appA_wIPS.html#wp1345929
Which two configurations are applied on the WLC to enable multicast, check multicast
stream subscriptions, and stream content only to subscribed clients? (Choose two)
A.
Enable IGMP snooping
B.
Set the IGMP timeout to 180 seconds
C.
Enable broadcast forwarding
D.
Enable 802.3x flow control mode.
E.
Set the AP multicast to 238.255.255.255
Enable IGMP snooping
Enable broadcast forwarding
Explanation: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lanwlan/
81671-multicast-wlc-lap.html
An engineer is implementing a FlexConnect group for access points at a remote location
using local switching but central DHCP. Which client feature becomes available only if this
configuration is changed?
A.
multicast
B.
static IP
C.
fast roaming
D.
mDNS
static IP
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/configguide/
b_cg87/flexconnect.html
What is the maximum time range that can be viewed on the Cisco DNA Center issues and
alarms page?
A.
3 hours
B.
24 hours
C.
3 days
D.
7 days
7 days
Which two statements about the requirements for a Cisco Hyperlocation deployment are
true? (Choose two.)
A.
C. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and
Cisco CMX.
D. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation
deployments.After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN
controller must be restarted.
B.
NTP can be configured, but that is not recommended
C.
The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and
Cisco CMX.
D.
The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
E.
If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation
deployments.
The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and
Cisco CMX.
If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation
deployments.