What is a prerequisite for configuring BFD?

A.

Jumbo frame support must be configured on the router that is using BFD.

B.

All routers in the path between two BFD endpoints must have BFD enabled.

C.

Cisco Express Forwarding must be enabled on all participating BFD endpoints.

D.

To use BFD with BGP, the timers 3 9 command must first be configured in the BGP routing process.

Refer to the exhibit.

Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Refer to the exhibit.

After redistribution is enabled between the routing protocols; PC2, PC3, and PC4 cannot reach PC1. Which action can the engineer take to solve the issue so that all the PCs are reachable?

A.

Set the administrative distance 100 under the RIP process on R2.

B.

Filter the prefix 10.1.1.0/24 when redistributed from OSPF to EIGRP.

C.

Filter the prefix 10.1.1.0/24 when redistributed from RIP to EIGRP.

D.

Redistribute the directly connected interfaces on R2.

Refer to the exhibit.

During troubleshooting it was discovered that the device is not reachable using a secure web browser. What is needed to fix the problem?

A.

permit tcp port 443

B.

permit udp port 465

C.

permit tcp port 465

D.

permit tcp port 22

Refer to the exhibit.

Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are uf SLA by defining frequency and schedulingsed

Which method changes the forwarding decision that a router makes without first changing the routing table or influencing the IP data plane?

A.

nonbroadcast multiaccess

B.

packet switching

C.

policy-based routing

D.

forwarding information base

An engineer is configuring a network and needs packets to be forwarded to an interface for any destination address that is not in the routing table. What should be configured to accomplish this task?

A.

set ip next-hop

B.

set ip default next-hop

C.

set ip next-hop recursive

D.

set ip next-hop verify-availability

After some changes in the routing policy, it is noticed that the router in AS 45123 is being used as a transit AS router for several service provides. Which configuration ensures that the branch router in AS 45123 advertises only the local networks to all SP neighbors?

A.

Option A

B.

Option B

C.

Option C

D.

Option D

What is the output of the following command:

show ip vrf

A.

Show's default RD values

B.

Displays IP routing table information associated with a VRF

C.

Show's routing protocol information associated with a VRF.

D.

Displays the ARP table (static and dynamic entries) in the specified VRF

An engineer configured a DHCP server for Cisco IP phones to download its configuration from a TFTP server, but the IP phones failed to toad the configuration What must be configured to resolve the issue?

A.

BOOTP port 67

B.

DHCP option 66

C.

BOOTP port 68

D.

DHCP option 69