Topic 2, Exam B
Which protocol does an access point use to draw power from a connected switch?
A.
Internet Group Management Protocol
B.
Adaptive Wireless Path Protocol
C.
Cisco Discovery Protocol
D.
Neighbor Discovery Protocol
Cisco Discovery Protocol
Refer to the exhibit.
Which command must be executed for Gi1.1 on SW1 to become a trunk port if Gi1/1 on
SW2 is configured in desirable or trunk mode?
A.
switchport mode trunk
B.
switchport mode dot1-tunnel
C.
switchport mode dynamic auto
D.
switchport mode dynamic desirable
switchport mode dynamic auto
Refer to the exhibit.
To which device does Router1 send packets that are destined to host 10.10.13.165?
A.
Router2
B.
Router3
C.
Router4
D.
Router5
Router3
Refer to the exhibit.
Router R2 is configured with multiple routes to reach network 10 1.1 0/24 from router R1. What protocol is chosen by router R2 to reach the destination network 10.1 1 0/24?
A.
eBGP
B.
static
C.
OSPF
D.
EIGRP
static
Which function does an SNMP agent perform?
A.
it sends information about MIB variables in response to requests from the NMS
B.
it requests information from remote network nodes about catastrophic system events.
C.
it manages routing between Layer 3 devices in a network
D.
it coordinates user authentication between a network device and a TACACS+ or RADIUS server
it sends information about MIB variables in response to requests from the NMS
A network administrator must to configure SSH for remote access to router R1 The requirement is to use a public and private key pair to encrypt management traffic to and from the connecting client. Which configuration, when applied, meets the requirements?
A.
Option A
B.
Option B
C.
Option C
D.
Option D
Option C
Which JSON data type is an unordered set of attribute- value pairs?
A.
array
B.
string
C.
object
D.
Boolean
object
A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet?
A.
ip route 10.10.1.0 255.255.255.240 10.10.255.1
B.
ip route 10.10.1.16 255.255.255.252 10.10.255.1
C.
ip route 10.10.1.20 255.255.255.252 10.10.255.1
D.
ip route 10.10.1.20 255.255.255.254 10.10.255.1
ip route 10.10.1.20 255.255.255.252 10.10.255.1
Which statement correctly compares traditional networks and controller-based networks?
A.
Only traditional networks offer a centralized control plane
B.
Only traditional networks natively support centralized management
C.
Traditional and controller-based networks abstract policies from device configurations
D.
Only controller-based networks decouple the control plane and the data plane
Only controller-based networks decouple the control plane and the data plane
Explanation: Most traditional devices use a distributed architecture, in which each control
plane is resided in a networking device. Therefore they need to communicate with each
other via messages to work correctly.In contrast to distributed architecture, centralized (or
controller-based) architectures centralizes the control of networking devices into one
device, called SDN controller
Router A learns the same route from two different neighbors, one of the neighbor routers is an OSPF neighbor and the other is an EIGRP neighbor. What is the administrative distance of the route that will be installed in the routing table?
A.
20
B.
90
C.
110
D.
115
90
Explanation: The Administrative distance (AD) of EIGRP is 90 while the AD of OSPF is
Page 29 out of 87 Pages |
Previous |